TSi lowest spin setting

Follow Thread

By Ryan

  • 1 Like
  • 3 Replies
  1. Ryan

    Ryan
    East coast

    I have the TSi 3. Curious, if a perfect robot hit balls, what settings would produce the lowest RPMs. I am currently usong D2, H1. (i have the tour ad IZ-7 x stiff shaft). THANKS!

  2. Chuck Z

    Chuck Z
    Mt Pleasant, SC

    Military
    Here is an article that I found regarding lowering you spin. We all are different and when I was fitted for my driver I was set up for a 10.75 TSI3 and my spin was 2200rpm with a Fujikura 661 Speeder TR Shaft. I am 75 and my carry was 235. May not be long for some on this sight but for me I am very happy and for my age group am in the upper percentile. Hopefully in reading this article it will help your issue and of course this is the opinion of one person who was a long ball champion. Some things that worked. Good luck.

    Reduce Spin, Add Distance - By Art Sellinger

    Power TipTour players are hitting the ball dramatically farther these days. Improvements in clubs and balls are contributing factors, but so is the fact that professionals have learned to reduce the amount of spin on their drives. Today's players put in long hours finding ways to reduce backspin and create the optimal launch angle. Work on the tips below to take spin off your tee shots and hit longer, more penetrating drives.

    Spin robs drives of their maximum distance. Golfers who can master the art of reducing spin on their tee shots will add extra yards to their drives. Here's how to go about it.

    First, tee the ball higher. Acquire some extra-long (23__ã4 inches) tees and peg the ball as high as possible. This promotes swinging up on the ball–rather than flat or, even worse, downward–and helps create launch angles of 10 degrees or higher and spin rates of 3,000 rpm and lower, proven to be the ideal launch conditions.

    Second, never sole the driver at address. This will help promote an upward strike on the ball, too. It also increases a golfer's chances of making contact with the clubface in the center or slightly above. Drives struck one or two grooves below the center of the clubface will have too much spin and a trajectory that starts low and then climbs.

    Third, eliminate any downward action in the swing. To reduce spin and maximize distance, golfers need to adopt the uppercut swing of a home-run hitter in baseball, not the flat swing of a contact hitter.

    Fourth, stay behind the ball. Any tendency to slide ahead of the ball at impact will lower the launch angle and create more spin. Stay down and through the shot at impact, swinging the club up, out and away from the body, not down and across it.
  3. Ryan

    Ryan
    East coast

    Chuck Z said:

    Here is an article that I found regarding lowering you spin. We all are different and when I was fitted for my driver I was set up for a 10.75 TSI3 and my spin was 2200rpm with a Fujikura 661 Speeder TR Shaft. I am 75 and my carry was 235. May not be long for some on this sight but for me I am very happy and for my age group am in the upper percentile. Hopefully in reading this article it will help your issue and of course this is the opinion of one person who was a long ball champion. Some things that worked. Good luck.

    Reduce Spin, Add Distance - By Art Sellinger

    Power TipTour players are hitting the ball dramatically farther these days. Improvements in clubs and balls are contributing factors, but so is the fact that professionals have learned to reduce the amount of spin on their drives. Today's players put in long hours finding ways to reduce backspin and create the optimal launch angle. Work on the tips below to take spin off your tee shots and hit longer, more penetrating drives.

    Spin robs drives of their maximum distance. Golfers who can master the art of reducing spin on their tee shots will add extra yards to their drives. Here's how to go about it.

    First, tee the ball higher. Acquire some extra-long (23__ã4 inches) tees and peg the ball as high as possible. This promotes swinging up on the ball–rather than flat or, even worse, downward–and helps create launch angles of 10 degrees or higher and spin rates of 3,000 rpm and lower, proven to be the ideal launch conditions.

    Second, never sole the driver at address. This will help promote an upward strike on the ball, too. It also increases a golfer's chances of making contact with the clubface in the center or slightly above. Drives struck one or two grooves below the center of the clubface will have too much spin and a trajectory that starts low and then climbs.

    Third, eliminate any downward action in the swing. To reduce spin and maximize distance, golfers need to adopt the uppercut swing of a home-run hitter in baseball, not the flat swing of a contact hitter.

    Fourth, stay behind the ball. Any tendency to slide ahead of the ball at impact will lower the launch angle and create more spin. Stay down and through the shot at impact, swinging the club up, out and away from the body, not down and across it.

    this is great thanks!

    Also, anyone know though the setting A1-D4 (16 options) + on TSi 3 H2-T2 (5 options) that robotically meaning perfect consistent square strikes which has the lowest RPM?

    I have mine on D2 H2 and read where this is one of the lowest spinning settings.

    Thanks
  4. Ryan

    Ryan
    East coast

    B3 H1 i am hitting it longer higher and straighter than anything ever. its AWESOME. 110+mph clubhead speed 150+mph ball speed 300+yds

Please login to post a comment.

Sign In

Haven't registered for Team Titleist yet?

Sign Up