718 AP2 PW (46*), SM6 50.12F, SM6 54.14F, SM6 60.12K Also have an SM6 46.08F and an AP2 GW (50*) depending on conditions. About to order SM 7s with similar specs - but likely going to D grind on the 60*

Jason

50-08 F
54-10 S
58-08 M
58-10 S
58-12 K

Our courses in AZ change dramatically throughout the year. The summer Bermuda is cut really tight so I play my 58/10 (sometimes my 58/8) and for the fluffier winter rye I play the 58/12.

Love your Titleist 1 iron pic.

I game srxn z765 PW - 46* v-sole, SM6 50/8 F grind, SM6 56/10 S grind, SM6 60/8 M grind - gives a good variety to hit from many diff lie's. Best thing about the S and M grinds is that I can still hit full shots and open both up for different shots lie's. I also found that the F grid works well in firm wet sand.

SM6 56 - 08.

My PW and AW are in the set.

I have the AP1 716 PW 43, W 47, SM6 52 08, miz 60 10. I feel this may not be the best setup. any ideas please.

Depends on how you play golf, Haseeb. Its different for everyone.

Just from your post, if you start to see a gap in shots or whatever, consider a 56 in there.

I play a 45 degree PW, 50 AW, and the 56 Vokey. Thats my style.

Whats yours?

SM7 52 12F 56 14F 60 12D. The D grind was a huge game changer for me for versatility around the greens. Give you the forgiveness and bounce of a K grind with the ability to open the face more without the leading edge coming up in the air

SM7 50.08F, 56.08M and 60.08M
I love them. ️
I can’t recommend them enough to all my mates!
Total game changers ️‍♂️

I play the 716 AP1 PW at 43* then a SM6 46-08 F (turned up to 47-09), SM7 52-12 F (turned down to 51-11), and finally

SM6 56-10 S. I don't play any lob style wedge because I tend to slide the club under the ball and I don't have a place to

practice any fancy shots.

Mark F.

Keep it simple...... Vokeys are SM6 50-08 and SM7 58-08M. MD3 64* wedge. I use an RM21 42* in place of a 9 iron.

50-08F 54-08M 60-08M all SM6. And now just added a 50-08F SM7 and love it. Will be replacing my other two with SM7s.. Thining about 56 instead of 54. Havent's 100% decided on the grind yet.

I use the 43* pitching wedge and 46* first wedge from my AP1 set. My other wedges are a 50* gap, 54* sand and 58* lob, all the older black nickle series. I keep thinking about ditching the 2 AP1 wedges for a 45% Vokey.I've just been lazy about looking for it.

Update..... use 46-08 (bent to 44) in place of 9 iron. SM6 50-08, SM7 56-08M and 62-08M.

Here it is.... 6* spacing from the 8 iron down to the 62*.

I’ve got the same set up as you and I love my SM6’s

M grind on the SW and LW. Full grind on the PW. 62-08M is actually easier to hit out of a hard bunker vs a 60-04L. I can play between 6-8* of bounce.

I tried SM6 58-12K bent to 56 a couple years ago. Great out of sand and grassy lies (even with 10* bounce) but not so great for chipping.

Took an SM7 60-12D out of the demo bin and bent it to 58. Better than the K grind but still 8* bounce suits my game more.

3 years ago carried an SM5 54-10S. Great for chipping and pitching. Not that stellar for bunker shots.

This is me. I'm in between being a digger and slider.

Using the 46 as a 9 iron (bent to 44*)

I found my 64 works better out of hard sand vs the SM7 62-08M The 60-12K is bent to 58 and the 56-08M is bent to 54.

SM7 46-10F (bent to 44), 52-08F (bent to 51), 58-08M. Cally MD3 64/8. I still have my SM6 60-12K (bent to 58).

Final bag. RM21 42* (9 iron replacement), SM7 46-10F-52-08-58-08M, MD3 64/8. For the Sunday bag, I have an Apex Grind 9 iron (45*).

My new wedge setup is

SM7 52.08 F Grind

SM7 56.10 S Grind

SM7 60.10 D Grind

All in the jet black color! Curious to see how they’ll look after some wear!

My final wedge setup. The 42 and 64 have been in my bag 2 years. 46-52-58 are SM7.